156_1__new-jbc-solder-feeder

2017 JBC推出新型SF自动焊锡破锡器

从任何位置自动送焊锡丝。
JBC是领先的焊接和返修设备制造商,推出了SF自动焊接机,其在手工焊接方面的最新技术创新。 SF加快了焊接过程,提高了生产效率。

这个新的焊料破锡机送锡器允许您从任何位置自动输送焊锡丝。您可以轻松地配置参数,例如分配线的速度和长度,并通过集成计数器监控消耗。

3种工作模式

您可以选择连续,不连续和程序模式。您最多可以定义35个动态程序。在每个步骤中,您可以使用不同长度的电线和点胶速度配置最多3个步骤。使用菜单选项顺序和循环地执行它们。

与V切

焊料馈送器具有小的刀片,其在输送焊丝时向下穿透焊剂芯。这种穿孔工艺允许更好的助焊剂流动和除气,避免焊接过程中的焊料和助焊剂飞溅(也可在没有V形切割的情况下)。

人体工学设计

符合人体工程学的SF280-A焊料送料手柄允许您从任何位置轻松地供给焊锡丝

它与焊接直径Ø0.8 mm,1mm和1.5 mm兼容。这意味着您可以更换导管以适应您的工作需要。

 

JBC原装SF-210VA破锡机送锡器

JBC introduces the new SF Automatic Solder Feeder

Feed solder wire automatically from any position.
JBC, a leading manufacturer of soldering and rework equipment, has introduced the SF Automatic Solder Feeder, its latest technological innovation in hand soldering. The SF speeds up the soldering process and increase production efficiency.

This new solder feeder allows you to feed solder wire automatically from any position. You can easily configure parameters such as speed and length of the dispensed wire and monitor the consumption thanks to the integrated counters.

3 working modes

You can choose from continuous, discontinuous and programs mode. You can define up to 35 dynamic programs. In each one you can configure up to 3 steps with different length wire and dispensing speed. Execute them sequentially and cyclically with the concatenation option.

With V-Cut

The solder feeder features a small blade that perforates the solder wire down to the flux core while feeding it. This perforation process allows better flux flow and outgassing avoiding solder and flux splashing during the soldering process (also available without V-cut).

Ergonomic design

The ergonomic SF280-A Solder Feed Handle allows you to feed solder wire easily from any position. It is compatible with solder diameters of Ø 0.8 mm, 1mm & 1.5 mm. This means you can change the guide tube to suit your working needs.

在线客服
在线客服
热线电话